MEICHEN Slim Vision Windows Systems

M&C Slim Vision Windows Systems

Engineered for Life in Australia & New Zealand.

M&C Slim Vision Windows Systems is the project brand of MEICHEN Slim Vision Windows Systems, specialising in ultra-slim aluminium windows and doors — narrow sightlines for unobstructed views, noise-reducing glazing for quieter interiors, and certified systems for residential, commercial and multi-residential projects.

Certified & Accredited By

AGWA - Australian Glass & Window Association Member NATA Accredited Laboratory S-Mark Certified Bureau Veritas (BV) Certification

Product Tested By

AZUMA Testing Laboratory Intertek Testing Services
Leading Edge Testing Laboratory
20+
Years of experience
43
Test & certification outcomes
200,000+ m²
Annual capacity
39
Registered patents
1,000+
Projects delivered

Testing · Certification · Accreditation

Independently Tested & Certified

Our products are tested and evaluated by AZUMA, Intertek and Leading Edge, covering key standards including AS 2047, AS/NZS 4284, AS 1288, NZS 4211 and NZS 4223.

In the Australian market, MEICHEN Slim Vision Windows Systems has achieved 43 test and certification outcomes compliant with Australian Standards, and holds the S-Mark AS 2047-2014 certification issued by Bureau Veritas (Certificate No. 3022).

As a full member of the Australian Glass and Window Association (AGWA) — Member No. 39011 — MEICHEN holds the following qualifications and training certificates:

  • AGWA Accredited Skills & Training Certificate · No. 39011
  • AGWA Accredited Compliance Certificate · No. 39011
  • AGWA AS 2047 Introduction Course · No. zOnCmevalC
  • AGWA AS 1288 Human Impact and Wind Loadings Course · No. oWCRC2oEle
  • AGWA National Construction Code Introduction Course · No. JYflXjOyz3
MEICHEN certifications and test reports — AGWA membership No. 39011, S-Mark AS 2047-2014, AGWA training certificates, and AZUMA, Intertek and Leading Edge test reports

AGWA membership, S-Mark certification and independent test reports — click to view full size

Australian Standards · Compliance

Compliance as Our Foundation

Your assurance of Australian standards, backed by independent testing and recognised certification.

Core Standards Adherence

Our products are designed and tested to comply with key Australian standards.

Performance highlights: 2.0 mm 6063-T5 aluminium profiles, water penetration resistance up to W4 (960 Pa on the Ultra Slim Coastal SD205 series), wind pressure resistance to cyclonic rating C4 (3,600 Pa), powder coating proven by more than 3,000 hours of salt-spray testing, and glazing systems with U-values below 1.6 meeting BASIX/NatHERS energy-efficiency requirements.

We hold certifications for 33 product series (48 door and window types) under AS 2047 and AS/NZS 4284, offering a wide range of compliant options for your project.

AS 2047 AS/NZS 4284 AS 1288 AS 4666 AS 2208

Engineered for Australian Conditions

SYSTEM SOLUTIONS
High-Performance for Local Standards

Climate-Ready Performance

Our systems are specifically designed to withstand Australia's harsh and variable climate, including coastal exposure, extreme temperature fluctuations, and high UV radiation.

Outstanding Performance Metrics

· Superior Water Tightness
· Excellent Air Tightness
· High Wind Resistance
· Superior Thermal Efficiency

Compliant & Certified

All products are rigorously tested and certified to meet or exceed Australian standards, ensuring reliableperformance in demanding environments.

Superior Product Performance

Engineered for Australian Conditions
BUILT FOR AUSTRALIA BEST MOMENTS

Proven Across Australian Projects

From hospitals and apartments to premium residential developments, our systems are built to support demanding Australian project requirements

Nepean Hospital Stage 1

Nepean Hospital Stage 1, Kingswood NSW

MEICHEN Slim Vision Windows Systems New South Wales (NSW), Australia · Hospital Construction Project BA150 Swing Door / Curtain Wall Systems · 6,500 m² · 2021

Class 1 hospital project in Kingswood, NSW, supplied with BA150 curtain wall windows, operable awning...

2 Murray Rose Avenue, Sydney Olympic Park

Antara Living, Sydney Olympic Park

MEICHEN Slim Vision Windows Systems Sydney Olympic Park, NSW, Australia · Residential Apartment Development MD150 Sliding Door / Awning Window · 4,000 m² · 2025

High-rise apartment development at Sydney Olympic Park supplied with MD150 sliding and awning systems. 4,000...

G01,G05, 103/5 Doohat Avenue,North Sydney

5 Doohat Avenue, North Sydney

MEICHEN Slim Vision Windows Systems Sydney, NSW, Australia · Class 2 Apartment Building MC100 Sliding Door / Awning / Hinged Door · 500 m² · 2023

Ultra-slim MC100 systems for a high-end Class 2 apartment project in North Sydney. 500 m²...

YALA RESORT Hilton

Hilton Yala Resort, Sri Lanka

MEICHEN Slim Vision Windows Systems Yala, Sri Lanka · Luxury Resort Hotel 160 Series Curtain Wall / 140 Series Sliding Door · 6,800 m² · 2023

Coastal luxury resort in Yala, Sri Lanka, with curtain wall and sliding systems. 6,800 m²...

PROPOSED COMMUNITY FIRST FEDERALCREDIT UNION BUILDING MAGATNA.GUAN

Community First Guam Federal Credit Union HQ

MEICHEN Slim Vision Windows Systems Guam · Headquarters and Member Service Center 60 Series Curtain Wall / 140 Series Sliding Door / Security Windows · 5,800 m² · 2023

High-security, hurricane-rated curtain wall and specialist windows for a financial headquarters in Guam. 5,800 m²...

Labuan Bajo Hotel (28 Units)

Kaliwatu Private Pool Villas and Residences, Labuan Bajo

MEICHEN Slim Vision Windows Systems Batu Cermin, Labuan Bajo, Indonesia · Private Pool Villas & Residences Slimline Sliding Doors / Panorama Fixed Windows / Glass Railings · 4,500 m² · 2023/2024

Slimline and panoramic systems for private pool villas in Labuan Bajo, Indonesia. Approximately 4,500 m²...

Client Feedback

What Our Clients Say

"MEICHEN Slim Vision Windows Systems provided a reliable window and door solution for the hospital project, meeting our requirements for structural strength, safety, acoustic insulation and durability. The products suit the needs of healthcare buildings and strike a good balance between performance and practicality."

Nepean Hospital Stage 1
Kingswood, NSW · Healthcare

"The modern window and door solutions from MEICHEN Slim Vision Windows Systems complemented the residential development's design. The products improved natural daylight and the building's appearance while meeting our requirements for thermal insulation, noise reduction and everyday living comfort."

Antara Living
Sydney Olympic Park · Residential

"The overall window and glass system perfectly blends with the natural beauty of Labuan Bajo. The ultra-slim frames create a stunning frameless sea view. The materials are highly corrosion-resistant and the team worked with great professionalism, earning high praise from the owners and guests."

Kaliwatu Private Pool Villas
Labuan Bajo · Hospitality
MEICHEN factory park in Zhaoqing with shipping container ready for export

About Us

A Trusted Partner for Australian Projects

MEICHEN Slim Vision Windows Systems specialises in the design, manufacture and delivery of aluminium window and door systems for the Australian, New Zealand and US markets. With over 20 years of experience and thousands of projects delivered, we run a 10,000 m² purpose-built facility with one automated line plus four production lines — an annual capacity of 200,000+ m².

A 36-strong team covers business & technical support (10), production (20) and overseas technical service (6), delivering one-stop service from shop drawing and manufacturing to sea freight, customs documentation and installation coordination.

10,000 m²
Manufacturing facility
36
Dedicated team members

Frequently Asked Questions

Answers for Specifiers & Builders

Are your windows and doors certified to Australian Standards?

Yes. Our products are tested to AS 2047, AS/NZS 4284, AS 1288, NZS 4211 and NZS 4223 by AZUMA, Intertek and Leading Edge. In the Australian market, MEICHEN holds 43 test and certification outcomes compliant with Australian Standards and the S-Mark AS 2047-2014 certification issued by Bureau Veritas (Certificate No. 3022).

Is MEICHEN a member of Australian industry associations?

Yes. MEICHEN Slim Vision Windows Systems is a full member of the Australian Glass and Window Association (AGWA), Member No. 39011, with AGWA-accredited compliance and training certificates, and its products are tested by NATA-accredited laboratories.

How quiet are the ultra-slim windows and doors?

The ultra-slim series uses 18-20 mm narrow frames with glass covering more than 90% of the opening area. Independent acoustic testing records noise reduction of up to 45 dB, making the systems well suited to street-facing apartments, hotels and quiet residential spaces.

What warranty do you provide on windows and doors?

Windows and doors carry a 5-year warranty, insulated glass units carry a 10-year warranty, and hardware carries a 5-year warranty (imported silent hardware carries a 15-year warranty where agreed in the project contract). Powder-coated finishes carry a 10-, 15- or 20-year colour warranty depending on the powder coating selected. Parts faulty due to manufacturing defects are replaced free of charge, with replacement freight covered by MEICHEN.

What is the typical production lead time?

Standard products are manufactured in 10-14 days and custom products in 18-25 days, followed by multi-stage quality inspection, reinforced export packing and sea freight coordination with full English compliance documentation.

What types of projects do you deliver?

MEICHEN supplies residential, commercial and multi-residential projects across Australia and New Zealand. More than 1,000 projects have been delivered, including Nepean Hospital Stage 1 in Kingswood NSW, Antara Living at Sydney Olympic Park and residential projects in North Sydney.

What is your manufacturing capacity?

Production runs in a 10,000 m² purpose-built facility with one automated line and four production lines, supported by a 36-person team, delivering an annual capacity of more than 200,000 m².

Which markets do you serve?

We serve the Australian, New Zealand and US markets, with one-stop export support covering shop drawings, manufacturing, sea freight, customs documentation and installation coordination.

GET STARTED TODAY!

Fill out the form, and our business manager will contact you within 24 hours